Ricoh SP 311SFNw Manual de iniciação - Página 13

Procurar online ou descarregar pdf Manual de iniciação para Impressora Ricoh SP 311SFNw. Ricoh SP 311SFNw 47 páginas. Network settings guide
Também para Ricoh SP 311SFNw: Manual de instalação rápida (2 páginas), Especificações (4 páginas), Especificações (4 páginas), Manual de instalação (2 páginas)

Note:

For NETGEAR routers, adding a WPS client (such as a printer) is performed through the

•

[ADVANCED] tab  [WPS Wizard], as shown below.

f. Follow screen prompts to enter Client's (printer's) PIN, i.e., number you wrote down in step 1f.

3. On printer, press [Connect]. Display reads, PIN Executing....

4. When printer display reads, Connection to AP has Succeeded,

press [Exit]  [Clear/Stop].

Note:

If the connection succeeds, an IP address has been assigned to the printer. To confirm, see

•

Appendix B: Print Configuration

If the connection fails, Connection to AP has Failed appears on the display, press [Exit] and

•

repeat from step 1. If the problem persists, contact 1-800-RICOH38 (742-6438), option #1.

5. Router web page should indicate, for example, "The wireless client [xyz] has been added to the

network successfully." Click [Logout].

6. Turn printer power switch Off. Wait a moment, and then turn On.

7. Check wireless connection status.

Display should read, Connected. To exit, press [Clear/Stop].

Note:

Also see

Appendix A: Check Wi-Fi Connection

•

8. Next, install Network Printer/Scanner Drivers. See

RICOH SP 311SFNw B&W Multifunction Laser Printer

Report.

Press [User Tools]

[Network Settings]



Status.

3.2 Network Quick

Getting Started Guide

[Wi-Fi]

[Wi-Fi Status].



Install.