Ricoh RDC I500 Manual de operação - Página 3
Procurar online ou descarregar pdf Manual de operação para Câmara digital Ricoh RDC I500. Ricoh RDC I500 27 páginas. Ricoh owner's manual digital camera rdc-i500
Imprimir página
Problem
Autofocus is on
Dirty lens or AF viewfinder
but camera not
Subject not in center of shooting
focusing
scope
Subject difficult to focus on
Distance to subject is too close
Flash will not
Recording mode set on
fire or will not
Memo) or
charge
Flash mode set on
Camera set on macro mode
White balance set to mode other
than auto
Battery exhausted
Image dark
Distance to subject more than
even with flash
approx. 2.5 m
Image is too
Subject is too close
bright
Overexposed
LCD brightness setting not correctly
adjusted
Image is too
Shot in low light with flash set to
(flash off)
dark
Underexposed
LCD brightness setting not correctly
adjusted
Unnatural
Shooting conditions difficult for auto
coloration of
white balance mode
image
Date and other
Screen display set to [No display]
recording data
not displayed
No playback or
Camera not set to
image will not
Incorrect playback source
appear
Card not inserted, or inserted card
does not contain any files
Card not formatted with this camera
Card contains incorrectly recorded
files
Card contains files in format not
supported by this camera
AV interface cable not properly
connected
Source of interference, such as
electric motor, nearby
Card contact surface dirty
Playback is not
Error in internal memory of camera
clear
Error in card
Cause
Clean lens or viewfinder.
Use focus lock.
Use focus lock or switch to manual focus.
Set macro mode.
(Voice
Set mode dial to
(Motion Picture)
(Text) mode.
(flash off)
Press
Press
Press WB button to switch white balance to
auto mode.
Charge battery.
Move closer to subject.
Set flash to flash off mode.
Adjust exposure compensation from
recording menu. Set time exposure mode
to OFF.
Press DISPLAY button 2 seconds or more
and adjust with
Press
Press
compensation.
Press DISPLAY button 2 seconds or more
and adjust with
Place a white object near subject, use
flash, or select manual white balance
mode.
Press DISPLAY button to switch display
mode.
(Play) mode
Set mode dial to
Press
source. Switch to another folder containing
files.
Insert card containing recorded images.
Use card that has been formatted and
recorded with this camera.
Insert card containing properly recorded
images.
Check format type.
Connect properly.
Move camera away from source of
interference.
Clean with soft, dry cloth.
Copy required files from internal memory
onto card and format internal memory.
Test camera with another card. If second
card displays well, problem is with card not
camera. Do not use this card.
Remedy
(Still Picture) or
button to cancel flash off mode.
button to cancel macro mode.
·
buttons.
button to cancel flash off mode.
button to adjust exposure
·
buttons.
(Play).
button to change playback
Page
–
P.49
P.49
P.64
P.63
P.47
P.50
P.55
P.63
P.59
P.15
P.63
P.55
P.58
P.77
P.37
P.55
P.58
P.37
P.59
P.41
P.85
P.82
P.43
P.82
P.20
P.35
P.20
P.82
P.86
–
–
P.35
P.88
–
129