Ricoh MPC 1500sp Manual de resolução de problemas - Página 5

Procurar online ou descarregar pdf Manual de resolução de problemas para Copiadora Ricoh MPC 1500sp. Ricoh MPC 1500sp 15 páginas.

Change the setting of SP3 112 004 (print mode setting 4), so that auto

shading is performed more often.

xxxxx000: Default (1 time per approx 300 pages)

xxxxx001:1.3 times

xxxxx002:2 times

xxxxx003:4 times

xxxxx004:10 times. Remember, the more times it cleans, the

slower the print.

5. Each visit, clean the maintenance unit, if you have tried all of the

above you may have to replace the maintenance unit.

Smudged images

This is usually caused when the customer copies or prints onto unsuitable

paper. If the paper is not absorbent enough, the ink cannot dry before the

print head returns. Unfortunately there is no hard and fast rule as to the type

of paper that should be used - it is just a matter of trial and error.

Smudged copies can also occur if the paper is too thick. This product is able

to feed up to 105gms from the trays, 162gms from the bypass and 220gms

from the one sheet bypass. If the customer is using 220gms paper, then the

envelope lever may have to be used (in the down position), this will raise the

print head by about 2mm giving more clearance. Make sure the lever is put

back to normal (up position) as this may cause quality issues when using

normal paper.

Envelope lever