Ricoh 7000 Manual de instalação - Página 2
Procurar online ou descarregar pdf Manual de instalação para Acessórios para impressoras Ricoh 7000. Ricoh 7000 4 páginas. Duplex unit for machine code: g080
Imprimir páginaRemove the protective cover on the left side of the printer.
Hold the protective cover by both sides, and while pushing
the left side of the cover ( ), open it in the direction of
the arrow ( ), and then remove ( ).
Note
You cannot use the removed protective cover.
Attach the paper guide to the stand. Hold it so that the
right side bends down as shown, and then while gripping
lightly ( ), insert it into the holes of the stand ( ).
Insert the claws of the stand into the holes on the left side
of the printer ( ), and then push down ( ).
Slowly open the front cover by pulling on the two areas on
the left and right.
ZDJP041J
ZDJP042J
ZDJP043J
ZDJH007J
Remove the green screwdriver, and then close the front
cover.
Use this screwdriver for all attachment and detachment of screws.
Note
After using the screwdriver, return it to its original position on
the inside of the front cover.
Tighten the four long screws fastening the duplex reversal
unit stand, using provided screwdriver. Fasten in the
c
c c , as shown.
order of
This completes the installation of the stand. Next, install the duplex reversal unit.
Installing the Duplex Reversal Unit
With both hands, hold the duplex reversal unit level, and
then insert the hooks into the groove of the stand. Adjust
the tip of the hooks to the line on the stand, as shown,
and then insert slowly. Do not let go of the duplex reversal
unit even after insertion.
The hooks of the duplex reversal unit clip around the bar inside the groove of the
stand.
ZHXH171J
ZDJP044J
ZHXH250J