Ricoh Aficio CL3000 Manual de Suplementos - Página 15

Procurar online ou descarregar pdf Manual de Suplementos para Acessórios para impressoras Ricoh Aficio CL3000. Ricoh Aficio CL3000 38 páginas. Sap printing
Também para Ricoh Aficio CL3000: Manual (49 páginas), Manual de instalação (3 páginas), Manual de instalação rápida (4 páginas), Manual suplementar (3 páginas), Manual de opções (48 páginas), Manual (12 páginas)

❒ The spool directory should normally be made under /var/spool/lpd and

the name should match that listed under the sd capability in /etc/print-

cap. Change the owner and group of the directory to root and lp. The fol-

lowing examples show how to make a /var/spool/lpd/npd spool

directory.

# cd /var/spool/lpd

# mkdir npd

# chown root npd

# chgrp lp npd

❖ ❖ ❖ ❖ Making the log file

Error messages are logged to a file created in the /var/log directory. The log

file name is the printer name followed by "d-errs".

Note

❒ The log file is used for logging some errors or warning messages by the

UNIX workstation.

❒ The log file should be made for every network printer entry listed in the

/etc/printcap file.

❒ The log file should normally be made under /var/log directory and the

name should match that listed under the lf capability in /etc/printcap.

Change the owner and group of the log file to root and lp. The following

examples show how to make a /var/log/npd-errs file.

# cd /var/log

# touch npd-errs

# chown root npd-errs

# chgrp lp npd-errs

Solaris

❖ ❖ ❖ ❖ Adding the IP address and host name to the /etc/hosts file

The following line is added to the /etc/hosts file. The IP address and printer

host name which you previously entered in the installation script will be

used.

192.168.15.16 nphost # Network Printer

• 192.168.15.16 is the IP address, nphost is the host name, from # to the end

of the line is a comment.

Note

❒ The /etc/hosts file contains a list of the IP addresses and their host names

of all of the hosts communicating on the network. Each entry is delimited

with a space or a tab, and each line is separated with a return.

❒ If you do not use NIS or DNS, you must manually enter the IP address and

host name of each workstation using the network printer in the /etc/hosts

file.

Using the Installation Shell Script