Ricoh G056 Boletim Técnico - Página 3
Procurar online ou descarregar pdf Boletim Técnico para Acessórios para impressoras Ricoh G056. Ricoh G056 46 páginas. Envelope feeder
Também para Ricoh G056: Manual de instalação (1 páginas), Manual de instalação (1 páginas)
Imprimir página
Model:
Model K-P1
Firmware Updating Procedure
1. Prepare 2 IC cards with the controller firmware.
2. Turn off the main switch.
3. Remove the IC card slot cover on the rear side of the machine as shown.
4. Insert IC card 1 and turn on the main switch.
"Onboard Sys. 1/2" is displayed.
5. Press "# Enter."
Note: Make sure that ∗ is displayed.
6. Scroll with the [ ] [ ] key and select "Update."
Press "# Enter" to start downloading.
The "On Line" LED starts blinking and the machine starts to
download the program.
(Notice that the ∗ mark disappears as the program is
downloaded.)
7. When updating with card 1 is finished, "Update 1/2 task done"
is displayed.
8. Turn off the main switch and replace the card with IC card 2.
Turn on the main switch, then downloading will automatically
start.
9. When updating with card 2 is finished, "Update done" is
displayed.
Then, remove the card, turn on the main switch and print the
configuration sheet.
Check that controller firmware is successfully updated.
T
B
echnical
ulletin
Date:
18-Jan-01
Onboard Sys. 1/2
Onboard Sys. 1/2
∗
Updating
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
Update 1/2 task done
Updating
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
Update done
PAGE: 3/3
No.:
RG058001
Update