Ricoh G413 Instruções de funcionamento suplementares - Página 23

Procurar online ou descarregar pdf Instruções de funcionamento suplementares para Scanner Ricoh G413. Ricoh G413 47 páginas. Image scanner

Using the Auto Resolve Manager

VRS opens the Auto Resolve Manager dialog box for each occurrence of an exception condition

with an Action type of Intervention or Auto Resolve, as defined in the VRS Administration

Utility dialog box. The Auto Resolve Manager gives you a range of exception handling selections,

as explained below.

Figure 14. VRS Auto Resolve Manager

Auto Resolve check box

The check box is selected if you designated the error condition action response as Auto

Resolve from the VRS Administration Utility dialog box. With the check box selected, the

Auto Resolve Manager goes into automatic mode. As a result, VRS automatically attempts to

rescan until the exception condition is resolved. If you want to temporarily disable the Auto

Resolve function for the error in question, clear the check box. Then select the Rescan button

when you are ready to scan the document again.

With the Auto Resolve check box cleared, the Auto Resolve Manager enters manual mode

and enables the Rescan, VRS, and Ignore buttons. As a result, VRS takes no action until you

select one of the buttons.

Rescan (manual mode only)

After reloading a document into the scanner, select this button to rescan the sheet.

VRS (manual mode only)

Use this button to open the VRS Interactive Properties dialog box, so that you can apply

property changes to the image in question. The VRS Interactive Properties dialog box opens

to the tab that most closely relates to the current exception image. For example, if you receive

a Brightness Out of Range warning, the VRS Interactive Properties dialog box would open to

the Clarity tab.

Ignore (manual mode only)

Use this button to accept the image "as is," send it to the scanning application, and proceed

with the scanning process.

Abort

Use this button stop the batch or cancel the scanning process. When you select Abort, any

error information is passed to your scanning application. The error image(s) are not sent to

the scanning application.

Kofax Image Products

VRS Getting Started Guide