Cisco 12006 series Manual de instruções de desembalagem - Página 9

Procurar online ou descarregar pdf Manual de instruções de desembalagem para Router de rede Cisco 12006 series. Cisco 12006 series 16 páginas. Chassis replacement instructions
Também para Cisco 12006 series: Ficha de dados (9 páginas), Manual de instruções de substituição (44 páginas)

Imprimir página

Repacking the Router

Note

Step 1

Step 2

Step 3

Step 4

Step 5

78-16104-02

This section describes how to repack your Cisco router into the shipping

container. This procedure assumes you have the pallet, packing material, and

hardware you saved when the chassis was unpacked.

If the original packing kit—consisting of the pallet base, hold-down brackets,

bolts, screws, plastic bag cover, packing material, and shipping cartons—was lost

or damaged, you can order another kit (Product Number GSR6-PKG=)

Place the router on a Cisco 12006/12406 shipping pallet.

Secure the side and rear brackets to the pallet using the bolts and screws you saved

when the chassis was unpacked (see

Tighten all of the captive screws on the power entry modules, power distribution

unit, and line cards so that they are secure.

Refer to

Figure 2

and:

Place the plastic bag cover over the router.

Place the accessory kit on top of the router.

Place the cardboard shipping container over the accessory kit and router.

Note

If the master shipper tape closure was removed, replace it before you

secure the bands to your package.

Secure the cardboard shipping container to the pallet using straps similar to the

ones used to ship the router to you.

Your router is ready for shipment.

Cisco 12006 and Cisco 12406 Router Unpacking and Repacking Instructions

Figure

3).

Repacking the Router