Cisco 12406 series Manual de instruções de substituição - Página 12

Procurar online ou descarregar pdf Manual de instruções de substituição para Router de rede Cisco 12406 series. Cisco 12406 series 44 páginas. Chassis replacement instructions
Também para Cisco 12406 series: Manual de instruções de desembalagem (16 páginas), Ficha de dados (9 páginas)

Imprimir página

Figure 9

Negative Terminal Port

Positive Terminal Port

Power down your router.

Warning

To remove power from the router, follow these steps:

Step 1

Turn off the switch on the faceplates of the power modules.

Step 2

Turn off all facility power source circuit breakers for power cables connected to the PDU.

Step 3

Disconnect facility power source cables:

•

For AC-powered systems, unplug both AC power cords from their power outlets and disconnect

them from the AC PDU. (See

•

For DC-powered systems, disconnect the source DC wires (negative, positive, ground) from the

terminal connector block on the DC PDU. (See

Step 4

Verify that all of the following conditions are true:

•

LEDs on the power module faceplates are off

•

Power module fans are off

•

All blower module fans are off

Both blower module LEDs are off

•

All alarm card LEDs are off

•

All RP and line card LEDs are off

•

In a noisy environment, place your hand in front of the exhaust vents at the rear of the chassis to verify

Caution

that the blowers are off.

Cisco 12006 and Cisco 12406 Router Chassis Replacement Instructions

PDU DC Power Connector Block

P O

W E

R A

Figure

G N

Ground Terminal Port

Terminal Port Connector Screws

7.)

Figure

9.)

78-16109-01