Cisco 1417 Manual de início rápido - Página 4

Procurar online ou descarregar pdf Manual de início rápido para Router de rede Cisco 1417. Cisco 1417 8 páginas.

Install the Router (continued)

B. Connect the router to the ADSL line

Use the included purple ADSL cable for connecting the router to the ADSL line.

Step 1

Step 2

Note: If you are connecting the router to a POTS splitter that uses data port pins 3 and 4 for

data, you should use the purple cable with the blue stripe. If you are not sure about what type

of POTS splitter to use, contact your ADSL service provider or your Cisco reseller.

Step 3

Step 4

Note: Refer to the "Using POTS Splitters and Microﬁlters" section in the "Installation"

chapter of the installation and conﬁguration guide for information on when to use POTS

splitters and microﬁlters.

Caution

connect the cable to the Ethernet port or to the console port. This will damage your

router.

Connect one end of the purple cable to the purple ADSL port on the router.

Connect the other end of the purple cable to the ADSL wall jack.

Either install a POTS splitter, or conﬁrm that your service provider installed a POTS

splitter. If you are not sure about what type of POTS splitter to use, contact your

ADSL service provider or your Cisco reseller.

Install microﬁlters if you need them for optimal telephone call quality.

Always connect the purple ADSL cable to the purple ADSL port. Do not

ADSL

(RJ-11)

wall jack

RJ-11 cable

Cisco 1417

CONSOLE

ADSL

LNK

FLASH PC CARD

ETHERNE T

ADSL port