ActronAir QUE QZB-100 Manual de instalação e do utilizador - Página 6
Procurar online ou descarregar pdf Manual de instalação e do utilizador para Controlador ActronAir QUE QZB-100. ActronAir QUE QZB-100 13 páginas.
Também para ActronAir QUE QZB-100: Manual de instalação e do utilizador (13 páginas)
Imprimir página
Pairing a Zone Controller
On master controller, go to 'MENU' > Settings > System Settings>
1
Zone Settings, then select which zone to set up.
2
Assign a named to the zone, then touch 'Add a zone device'.
3
Touch 'A new zone controller'.
Follow the on screen instructions.
4
10
Press and hold the 'Pair' button until 3 green light flashes
5
(on the button).
NOTE:
3 red flashes means the device failed to pair to master controller.
Retry pairing the zone controller.
6
If successful, master controller will show that the device is paired.
Confirm the serial number of the zone controller then touch
to accept.
NOTE:
Zone controller serial number is printed on the back of the device.
Next screen will show the paired zone controller and its
serial number.
If a remote sensor is required, repeat steps 1-6. However, at step 3
select 'A remote sensor' then follow the on screen instructions.
Welcome!
Connecting
Connected
Not Co
Device is not connected
This device is now
This device is now connected
This devic
to the AC
trying to connect
to the main controller.
to the m
to the main controller.
Please go to the main
Please return to the main
Please r
controller
to setup.
Please wait
controller
to complete setup.
control
Pair
button
Software Update
Software Update
Software Update
WARNING!
This device is now
This device failed to
The battery level is low.
downloading software.
update software!
Please wait...
Error code X
Please replace the batteries
Press any button to try again.
to update software.
11