Cisco 2524 - Router - EN Manual de configuração - Página 8
Procurar online ou descarregar pdf Manual de configuração para Router de rede Cisco 2524 - Router - EN. Cisco 2524 - Router - EN 23 páginas. Troubleshooting guide
Também para Cisco 2524 - Router - EN: Manual de configuração (23 páginas), Visão geral (10 páginas), Preparação para a instalação (19 páginas), Manual de resolução de problemas (4 páginas)
Imprimir página
Configuring the Router
Step 4
Step 5
Step 6
4-8 Cisco 2524 and Cisco 2525 Router User Guide
When the System Configuration Dialog asks whether you want to view the current
interface summary, press Return or enter yes:
First, would you like to see the current interface summary? [yes]:
Any interface listed with OK? value "NO" does not have a valid
configuration
Interface
IP-Address
Ethernet0
unassigned
BRI0
unassigned
Serial0
unassigned
Serial1
unassigned
Configure the global parameters. Choose which protocols to support on the
Ethernet interface. For IP installations, you can press Return to accept the default
values (in brackets) for most of the questions. A typical configuration follows:
Configuring global parameters:
Enter host name [Router]:
Next, you are prompted to enter an enable secret password. There are two types of
privileged-level passwords:
•
Enable secret password (a very secure, encrypted password)
•
Enable password (a less secure, nonencrypted password)
The enable password is used when the enable secret password does not exist.
For maximum security, be sure the passwords are different. If you enter the same
password for both, the router will accept your entry, but will display a warning
message indicating that you should enter a different password.
Enter an enable secret password:
The enable secret is a one-way cryptographic secret used
instead of the enable password when it exists.
Enter enable secret: pail
The enable password is used when there is no enable secret
and when using older software and some boot images.
OK?
Method
Status
NO
not set
up
NO
not set
up
NO
not set
down
NO
not set
down
Protocol
down
up
down
down