Setting, Monitoring and Controlling from a Computer
Resize
Has the same function as the [Resize] button on the remote control.
Switches between the actual display size (resolution of the signal
being input) and the resized display size (enlarged to fill the screen)
when projecting computer images.
Volume
Has the same function as the [Volume] button on the remote
control.
Adjusts the volume of the inbuilt speaker, or external speakers to
which the projector is connected. Volume increases when you click
on "+" and decreases when you click on "-".
Power
Has the same function as the [Power] button on the remote control.
This turns the projector power ON and OFF.
Monitoring and Control Using EMP Monitor
When the projector and a computer are connected with the wireless LAN
Access point mode, or Wired LAN connection mode, EMP Monitor can be
used to check the statuses of multiple projectors that are connected to the
network and to carry out operations such as turning the power for the
projectors on and off and changing the signal sources, all using a single
computer. If there are several projectors that have been set up in different
classrooms or meeting rooms, for instance, they can all be started at once
and monitored by a single operator.
TIP
A maximum of 64 projectors can be collectively monitored and controlled.
•
Setup and control are possible using the EMP Monitor if "Standby Mode"
•
is set to "Network ON" in the "Advanced1" menu of the projector's
configuration menu, even if the projector is in standby mode (when the
Power is off) .
The administrative function using EMP Monitor cannot be used on a
•
wireless LAN in Easy connect mode.
Check the following points before starting up EMP Monitor.
• EMP Monitor must be installed in the computer to be used for
monitoring and control. s"Installing EasyMP Software" in the
EasyMP Setup Guide
• Configure the network settings to establish connections between
the projectors and the computer via Access point mode, or Wired
LAN connection mode. s "Connecting in Access Point Mode or
Wired LAN connection mode" in the EasyMP Setup Guide
• If using Windows 2000/NT4.0/XP, the computer must be started
up in Administrator mode.
EasyMP Operation Guide
32
Imprimir página