Cisco 2811 - Voice Security Bundle Router Manual de início rápido - Página 36

Procurar online ou descarregar pdf Manual de início rápido para Router de rede Cisco 2811 - Voice Security Bundle Router. Cisco 2811 - Voice Security Bundle Router 45 páginas. Integrated services routers
Também para Cisco 2811 - Voice Security Bundle Router: Operações (31 páginas)

Imprimir página

Router> enable

Router#

Step 5

For configuration procedures, see the applicable configuration instructions in the Cisco 2800 series software

configuration documents. See the "Where to Go Next" section on page 36 for information about accessing these

documents.

Note

To avoid losing work you have completed, be sure to save your configuration occasionally as you proceed. Use

the copy running-config startup-config command to save the configuration to NVRAM.

Step 6

When you have finished the initial configuration, verify the initial configuration. See the "Verify the Initial

Configuration" section on page 36 for verification procedures.

Verify the Initial Configuration

Verify that the new interfaces are operating correctly by performing the following tests:

• To verify that the interfaces are operating correctly and that the interfaces and line protocol are in the correct state—up or

down—enter the show interfaces command.

• To display a summary status of the interfaces configured for IP, enter the show ip interface brief command.

• To verify that you configured the correct hostname and password, enter the show configuration command.

When you complete and verify the initial configuration, your Cisco router is ready to configure for specific functions. See the

"Where to Go Next" section on page 36 for information about locating documentation for advanced configuration procedures.

Where to Go Next

For additional configuration procedures, see the appropriate Cisco 2800 series routers documentation or Cisco IOS software

documentation, available online on Cisco.com.

Tip

See the "Obtaining Documentation" section on page 36 for help in locating these documents.

To access documentation on Cisco.com:

For Cisco 2800 series routers platform documentation, start on Cisco.com at http://www.cisco.com, and choose Products &

Solutions > Routers & Routing Systems > Cisco 2800 Series Integrated Services Routers > Technical Support and

Documentation > Cisco 2800 Integrated Services Routers document type > Document.

For Cisco IOS software documentation, start on Cisco.com at http://www.cisco.com, and choose Products & Solutions > Cisco

IOS Software > Latest Releases > Your Cisco IOS software release.

To get updated information about platform support for features, access Feature Navigator II at http://www.cisco.com/go/fn.

(This requires a registered account on Cisco.com.)

To access documentation using Cisco Connection Online (CCO):

For Cisco 2800 series routers platform documentation, start on Cisco.com at http://www.cisco.com, and click the Technical

Support and Documentation link. Click the Former Technical Documentation site link and navigate to Modular Access Routers

and to the documentation for your router.

For Cisco IOS software documentation, start on Cisco.com at http://www.cisco.com, and click the Technical Support and

Documentation link. Click the Former Technical Documentation site link and navigate to the Cisco IOS software documentation

for the Cisco IOS software release that is installed on your router.