Cisco 2821 Series Operações - Página 8
Procurar online ou descarregar pdf Operações para Router de rede Cisco 2821 Series. Cisco 2821 Series 31 páginas. 2800 series integrated services routers
Também para Cisco 2821 Series: Instalação e actualizações (21 páginas), Ficha de dados (20 páginas), Operações (31 páginas), Manual de início rápido (47 páginas)
Imprimir página
Router Physical Interface
10/100 Ethernet LAN Ports
HWIC Ports
Console Port
Auxiliary Port
ENM Slot
USB Ports
10/100 Ethernet LAN Ports
HWIC Ports
Power Switch
Console Port
Auxiliary Port
ENM Slot
10/100 Ethernet LAN Port LEDs
AIM LEDs
PVDM LEDs
Power LED
Activity LEDs
Auxiliary LED
Compact Flash LED
Console Port
Auxiliary Port
USB Ports
Main Power Plug
Redundant Power Supply Plug
The CF card that stored the IOS image is considered an internal memory module, because the
IOS image stored in the card may not be modified or upgraded. The card itself must never be
removed from the drive. Tamper evident seal will be placed over the card in the drive.
2.2 The 2821 Cryptographic Module Physical Characteristics
The 2821 router a multiple-chip standalone cryptographic module. The router has a processing
speed of 350MHz. Depending on configuration, either installed AIM-VPN/EPII-Plus card or the
internal NetGX chip or the IOS software is used for cryptographic operations.
© Copyright 2007 Cisco Systems, Inc.
This document may be freely reproduced and distributed whole and intact including this Copyright Notice.
FIPS 140-2 Logical Interface
Data Output Interface
Control Input Interface
Status Output Interface
Power Interface
Table 4 – 2811 FIPS 140-2 Logical Interfaces
Figure 4 – The 2821 router case
8