Cisco 4000 Series Manual - Página 2

Procurar online ou descarregar pdf Manual para Router de rede Cisco 4000 Series. Cisco 4000 Series 18 páginas. Upgrading memory
Também para Cisco 4000 Series: Preparação para a instalação (11 páginas), Manual de instalação (18 páginas), Manual de substituição (16 páginas), Upgrade Manual (24 páginas)

•

Dual-port high-speed synchronous serial and 16-port low-speed

synchronous/asynchronous serial. The high-speed ports supports EIA/TIA-232,

EIA/TIA-449, V.35, X.21, NRZ/NRZI, DTE/DCE, or EIA-530 DTE interfaces. The

low-speed ports support EIA/TIA-232, V.35, or X.21 interfaces in DTE or DCE mode.

Each low-speed port can be individually configured for synchronous or asynchronous.

•

Single-port HSSI

•

Single-port and dual-port Token Ring

•

Dual attachment single-mode FDDI

•

Single attachment or dual attachment multimode FDDI

•

Four-port or eight-port ISDN BRI

•

Four-port balanced or unbalanced G.703/G.704

•

Single-port channelized T1/ISDN PRI

•

Single-port balanced or unbalanced channelized E1/ISDN PRI

•

Single-port ATM with single-mode OC-3 and long-reach capability, multimode OC-3,

DS-3, or E3 interfaces

Note

configuration note packet shipped with your router.

Note

and RS-449 before their acceptance as standards by the Electronics Industries Association

(EIA) and Telecommunications Industry Association (TIA)

Figure 1-1 shows the front panel of a Cisco 4000 series router.

Figure 1-1

1-2 Cisco 4000 Series Installation Guide

For information about modules released after publication of this guide, see the

EIA/TIA-232 and EIA-TIA-449 were known as recommended standards RS-232

Cisco 4000 Series Chassis—Front Panel