Cisco 7513 Series Atualização - Página 11

Procurar online ou descarregar pdf Atualização para Router de rede Cisco 7513 Series. Cisco 7513 Series 20 páginas. Chassis replacement
Também para Cisco 7513 Series: Manual de início rápido (44 páginas), Manual de instruções de substituição (26 páginas), Ficha de dados (11 páginas), Manual (30 páginas), Manual de instruções de substituição (19 páginas), Manual de instruções de substituição (22 páginas)

Chapter 7

Maintaining Your Cisco 7513, Cisco 7513-MX, and Cisco 7576 Router

When the blower is all the way into the chassis opening, tighten the captive installation screws on the

Step 4

front of the blower module.

This completes the blower module removal and replacement procedure.

Removing and Replacing the Cisco 7513, Cisco 7513-MX, and Cisco 7576

Chassis Cover Panels

Each cover panel on the Cisco 7513, Cisco 7513-MX, and Cisco 7576 has four fasteners that secure the

panels to the front of the chassis. The following procedures describe how to remove and replace the front

cover panels.

Step 1

Use a 3/16-inch flat-blade screwdriver to gently loosen the top of each cover panel.

Pull the top of the upper panel out about 2 inches (5.08 cm); grasp the sides and carefully pull it outward,

Step 2

away from the chassis. Repeat this for the bottom panel.

See the appropriate sections depending on the replacement procedures you need to perform. Then, to

Note

replace the chassis cover panels, proceed to Step 3.

OL-5008-03 B0

Maintenance Procedures for the Cisco 7513, Cisco 7513-MX, and Cisco 7576

Cisco 7500 Series Installation and Configuration Guide

7-11