C.T.M. HS-730 Folheto de instruções - Página 12
Procurar online ou descarregar pdf Folheto de instruções para Scooter C.T.M. HS-730. C.T.M. HS-730 17 páginas. 7-series mobility scooter
Imprimir página
- 1. Table of Contents
- 2. Introduction
- 3. Important Precautions
- 4. Electromagnetic Interference and Warnings
- 5. Identification of Parts
- 6. Operating Your Scooter
- 7. Disassembling Your Scooter
- 8. Assembling Your Scooter
- 9. Charging the Batteries
- 10. Care and Maintenance
- 11. Troubleshooting
- 12. Technical Specifications
7-Series
Remove Rear Hood (H) by pushing the end forward. (See Fig. 10)
Release two Locking Pins (I) to separate front and rear units. (See Fig. 11)
With one hand on Rear Frame (J) and other on Seat Piller (K) as Hand hold. detach front
and rear sections. (See Fig. 12)
By removing the Front Basket (L) and adjusting the tiller down by using the Tiller Angle
Adjustment (M) you should be able to place all parts in the trunt and part of rear seat.
(See Fig. 13)
Figure 10
Figure 10
K
J
Figure 12
Figure 12
10
Instruction Booklet
H
Figure 11
Figure 11
M
L
Figure 13
Figure 13
I