CAB EOS5 Manual do operador - Página 13

Procurar online ou descarregar pdf Manual do operador para Fabricante de etiquetas CAB EOS5. CAB EOS5 15 páginas.
Também para CAB EOS5: Manual de serviço (20 páginas)

Imprimir página
CAB EOS5 Manual do operador
5

Cleaning and Replacing the Blades

Warning!
!
 Disconnect the printer from the electrical outlet.
Warning!
!
Risk of injury. The cutter blades are sharp.
i
Notice!
When cutting through the label material instead of the label gap
remains of adhesive may accumulate on the blades. If operating in
backfeed mode, such remains of adhesive may be deposited on the
drive roller as well.
 Clean the drive roller and the cutter blades often.
1
2
3
4
Figure 4
Dismount the cutter
1. Fold down cutter.
2. Push release push button (1) and lift blade unit (2) from the cover (4).
3. If the blades are only slightly dirty it is sufficient to clean them with a soft
cloth and continue with point 5.
13