Cisco NCS 4200 Series Manuais de configuração - Página 15
Procurar online ou descarregar pdf Manuais de configuração para Router de rede Cisco NCS 4200 Series. Cisco NCS 4200 Series 30 páginas. 1 port oc-48/ 4 port oc-12/oc-3 + 12 port t1/e1 + 4 port t3/e3 cem interface module configuration guide, cisco ios xe fuji 16.7.x (cisco ncs 4200 series)
Também para Cisco NCS 4200 Series: Manual de configuração (36 páginas)
Imprimir página
Performance Monitoring and Overhead Bytes
The VCoP smart SFP supports the performance monitoring counter to maintain the path quality of the link.
You can view the statistics or error count generated on the VCoP smart SFP, if you have the configuration that is described:
enable
configure terminal
controller SONET 0/0/8
threshold b1-tca 8
threshold
b2-tca 8
framing
sonet
overhead j0 6
overhead s1s0 2
!
sts-1
1
overhead
c2 2
threshold b3-ber_sd 8
threshold b3-ber_sf 8
overhead
1 message PATH_TRACEj
threshold
b3-tca 8
mode unframed
cem-group0 cep
!
The following parameters affect SONET configuration:
• Overhead - Sets the SONET overhead bytes in the frame header to a specific standards requirement, or to ensure interoperability
with equipment from another vendors.
◦ J0 - Sets the J0/C1 byte value in the SONET section overhead.
Note
1 byte, 16 bytes, and 64 bytes are the supported values for J0.
◦ J1 - Path Trace Byte
◦ C2- Path Signal label
◦ S1S0 - Sets the SS bits value of the H1 byte in the SONET line overhead
• Alarm Reporting - Enables reporting for all or selected alarms.
◦ B1 - Section BIP Error (SF/SD)
◦ B2 - Line BIP Error (SF/SD)
◦ B3 (SF/SD) - STS Path BIP Error
◦ sd-ber - Sets Signal Degrade BER threshold
◦ sf-ber - Sets Signal failure BER threshold
The performance monitoring result is displayed using the show controller command. The following snippets are the performance
monitoring details when the show controller command is executed.
Router# show controller sonet 0/0/8
SONET 0/0/8 is up.
Hardware is 12xGE-4x10GE-FIXED
15