Cisco Nexus 1000V Manual de implantação - Página 29
Procurar online ou descarregar pdf Manual de implantação para Router de rede Cisco Nexus 1000V. Cisco Nexus 1000V 49 páginas. For microsoft hyper-v
Também para Cisco Nexus 1000V: Ficha de dados (8 páginas), Manual de implantação (25 páginas), Manual (6 páginas), Manual de instalação (27 páginas)
Imprimir página
When a new VEM is online, either after initial installation or upon restart of a Microsoft Hyper-V host, it is an
unprogrammed line card. To be correctly configured, the VEM needs to communicate with the VSM. The Microsoft
SCVMM server automatically sends the opaque data to the VEM, which the VEM uses to establish communication
with the VSM and download the appropriate configuration data.
Port Profiles
Port profiles are network policy templates that enable the VSM administrator to define network policy once and
then apply it all interfaces requiring identical configuration. Any change made to the port profile is automatically
applied to all interfaces that are using the port profile.
The Cisco Nexus 1000V Switch supports creation of two types of port profiles: vEth and Eth port profiles. Virtual
Ethernet port profiles are applied to vEth interfaces, and Ethernet port profiles are applied to server uplink Eth
interfaces.
The Cisco Nexus 1000V Switch for Microsoft Hyper-V also incorporates the new concept of dynamic port profiles,
which is explained in the following sections.
Virtual Ethernet Port Profiles
Virtual Ethernet port profiles are the primary mechanisms by which network policy is defined and applied to the
Microsoft Hyper-V switch's vEth interfaces.
A port profile can be applied on a virtual interface using the vethernet keyword for the port profile type or on a
physical interface using the ethernet keyword for the port profile type. If no keyword is specified, the vEth type
(vethernet ) is used by default.
A port profile is a collection of interface-level configuration commands that are combined to create a complete
network policy.
The port profile concept is new, but the configurations in port profiles use the same Cisco syntax that is used to
manage switch ports on traditional switches. The VSM administrator:
1.
Defines a new port profile in switch configuration mode
2.
Applies Interface-level configuration commands
3.
Enables the port profile
4.
Publishes the port profile to Microsoft SCVMM
The process of publishing the port profile enables the VSEM defined for Microsoft SCVMM to pull the port profile
configuration into Microsoft SCVMM. The Microsoft SCVMM administrator can then create a port classification that
uses the port profile.
Note:
SCVMM administrator must either refresh the switch extension or wait for Microsoft SCVMM to autorefresh it
(refresh occurs every 30 minutes). This behavior is different from that for Cisco Nexus 1000V and VMware
vCenter, in which creation of a port profile results in instantaneous creation of a port group.
A vEth profile is a port profile that can be applied on virtual machines and on the Microsoft Hyper-V host's virtual
interfaces such as management, live migration, and storage vNICs.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Publishing the port profile does not automatically make it available to Microsoft SCVMM. The Microsoft
Page 29 of 48