CAB 4114R-200 Manual do operador - Página 10

Procurar online ou descarregar pdf Manual do operador para Impressora CAB 4114R-200. CAB 4114R-200 13 páginas. Stroke applicator

Operation

Fig. 4

Mounting applicator on printer

Attention!

Initiation, adjustments and changing of parts is to be performed by qualified service personnel only.

 Initiation/Service Manual Applicators.

Attention!

 Disconnect the printer from the power supply before mounting the applicator!

 Ensure that the printer is positioned and standing securely!

 Connect the compressed air only after mounting the applicator to the printer!

When cleaning the applicator it may need to be necessary to turn it away or even dismount it entirely.

Ensure that none of the adjustment screws or setting elements are altered to make certain that the labeling process

can continue unhindered after cleaning.

Turn away/dismount the applicator

1. To turn away the applicator loosen thumbscrew (5) and swing the applicator aside.

2. Disconnect SUB-D 15 male connector (6) from the female connector (7) of the printer.

3. Loosen screw (4) to release the locking plate (3).

4. Lift the applicator upward.

Mount the applicator

1. Hang the applicator to the printer via the hinges (1) and (2).

2. Connect SUB-D 15 male connector (6) to the female connector (7) of the printer.

3. To secure the applicator to the printer loosen screw (4) and move the locking plate part (3) under the hinges and

tighten screw (4).

4. Swing the applicator to the printer and tighten the thumbscrew (5).