Cisco SGE2000 Manual de configuração - Página 14

Procurar online ou descarregar pdf Manual de configuração para Router de rede Cisco SGE2000. Cisco SGE2000 46 páginas. Nx-os fabric extender
Também para Cisco SGE2000: Manual de instalação rápida (32 páginas), Nota de lançamento (16 páginas), Ficha de dados (5 páginas), Manual de atualização de firmware (5 páginas), Manual de início rápido (2 páginas)

Host Interface Port Channels

• Servers utilizing active/standby teaming, 802.3ad port channels, or other host-based link redundancy

• Any device running spanning tree connected to a Fabric Extender host interface results in that host

• Any edge switch that leverages a link redundancy mechanism not dependent on spanning tree such as

Ingress and egress packet counters are provided on each host interface.

For more information about BPDU Guard, see the Cisco Nexus 7000 Series NX-OS Layer 2 Switching

Configuration Guide.

The Fabric Extender supports host interface port channel configurations. You can combine up to 8 interfaces

in a standard mode port channel and 16 interfaces when configured with the Link Aggregation Control Protocol

(LACP).

Port channel resources are allocated when the port channel has one or more members.

Note

All members of the port channel must be Fabric Extender host interfaces and all host interfaces must be from

the same Fabric Extender. You cannot mix interfaces from the Fabric Extender and the parent switch.

Layer 3 mode is supported on host interface port channels.

A host interface port channel also supports subinterfaces. You can create up to 1000 subinterfaces on a Fabric

Extender host interface port channel.

For more information about port channels, see the Cisco Nexus 7000 Series NX-OS Interfaces Configuration

Guide.

The Fabric Extender supports host interface port channel configurations. You can combine up to 8 interfaces

in a standard mode port channel and 16 interfaces when configured with the Link Aggregation Control Protocol

(LACP).

Port channel resources are allocated when the port channel has one or more members.

Note

All members of the port channel must be Fabric Extender host interfaces and all host interfaces must be from

the same Fabric Extender. You cannot mix interfaces from the Fabric Extender and the parent switch.

Layer 2 mode is supported on host interface port channels.

Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide

mechanisms can be connected to Fabric Extender host interfaces.

interface being placed in an error-disabled state when a BPDU is received.

Cisco FlexLink or vPC (with the BPDU Filter enabled) can be connected to a Fabric Extender host

interface. Because spanning tree is not used to eliminate loops, you should ensure a loop-free topology

below the Fabric Extender host interfaces.

Overview

OL-25816-02