Cisco SGE2000 Manual de configuração - Página 30

Procurar online ou descarregar pdf Manual de configuração para Router de rede Cisco SGE2000. Cisco SGE2000 46 páginas. Nx-os fabric extender
Também para Cisco SGE2000: Manual de instalação rápida (32 páginas), Nota de lançamento (16 páginas), Ficha de dados (5 páginas), Manual de atualização de firmware (5 páginas), Manual de início rápido (2 páginas)

Associating a Fabric Extender to a Fabric Interface

F2 modules are only supported by the following FEX devices:

Note

• 2248TP

• 2248TP-E

• 2232TP

• 2232PP

• 2232TM

• 2224TP

Each port in the ASIC has an index. Allow only ports with similar indices across ASICs to be added to a

Note

port channel.

For example, if port 1 has an index of 1 and port 2 has an index of 2, then

• Supported: Port 1 of ASIC 1 and port 1 of ASIC 2 are added to a port channel.

• Not supported: Port 1 of ASIC 1 and port 2 of ASIC 2 to form a port channel.

In general, a set of ports from an ASIC that has an index sub-set S, such as {1,2,4}, is allowed to be added

to a port-channel only if the port-channel has an equivalent or an empty set.

SUMMARY STEPS

1. vdc switch

2. limit-resource module-type f2

3. interface ethernet <mod-number><port-range>

4. allocate interface ethernet <slot-port>

5. switchport mode fex -fabric

6. fex associate <FEX chassis number>

7. channel-group <port-channel number>

8. no shutdown

9. int po <port-channel number>

10. no shutdown

DETAILED STEPS

Command or Action

Step 1

vdc switch

Example:

switch(config)# vdc switch

Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide

Configuring the Fabric Extender

Purpose

Specifies the VDC.

OL-25816-02