Cisco Small Business Pro SRP527W Manual de início rápido - Página 11
Procurar online ou descarregar pdf Manual de início rápido para Router de rede Cisco Small Business Pro SRP527W. Cisco Small Business Pro SRP527W 17 páginas. Dot (digital office technology)
Também para Cisco Small Business Pro SRP527W: Manual do utilizador (27 páginas), Manual do utilizador (21 páginas)
Imprimir página
Insert the AC power plug into an electrical outlet.
S
6
TEP
Orient the antenna to the vertical position.
S
7
TEP
Press the On/Off switch to the on position.
S
8
TEP
The POWER/SYS light on the front panel flashes green while the
SRP boots. After booting, the light turns solid green.
The hardware installation is now complete.
Verifying the Hardware Installation
5
To verify the hardware installation, complete these tasks:
• Check the cable connections.
• Check the lights, as described in
the POWER/SYS light is solid green.
If you encounter problems, go to the Cisco Small Business Support
Community website at www.cisco.com/go/smallbizsupport. For technical
documentation and other links, see
Getting Started with the Configuration
6
After you install the SRP, configure it by using the Setup Wizard.
Before you get started, verify that your computer meets the software
requirements as specified in
Configure your computer to use DHCP for its LAN connection.
S
1
TEP
Using an Ethernet cable, connect your computer to an available
LAN port (1-4) on the SRP. Your computer will automatically obtain
an IP address in the 192. 1 68. 1 5.x range.
Start a web browser.
S
2
TEP
In the Address bar, enter the default IP address:
http://192.168.15.1
When the login page appears, enter the username and password.
S
3
TEP
The default username is cisco.
The default password is cisco.
Passwords are case sensitive.
N
OTE
Click Log In.
S
4
TEP
Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520 Models)
Front Panel Lights, page
Where to Go From Here, page
Before You Begin, page
5. Verify that
13.
2.
11