CAB HD.80 Manual de início rápido - Página 10

Procurar online ou descarregar pdf Manual de início rápido para Abertura de portões CAB HD.80. CAB HD.80 15 páginas.

ìThe slow down in close position can be adjusted by means of the dedicated valve (Fig.11).

ìRemove the protection cap and using an allen key by 3 mm:

ì-loosen ( counterclockwise rotation) the valve in order to increase the slow down speed

ì-tighten (clockwise rotation) the valve in order to reduce the slow down speed.

Never force the adjusting valve

The protective covers

After adjusting the slowdown the covers can be replaced (Fig.11).

Take great care in ensuring that the drain hole faces the ground.

Wiring

The operator is supplied with the wiring cable already installed and wired (Fig.12). To connect it to the control unit see

the diagram and instructions for the control unit.

The power cable is best protected by a 12mm spiral sheath that has to be inserted in the coupling provided.

An earth connection is compulsory.

Topping up/changing oil

The oil level in all hydraulic operators must be periodically checked.

To top up the oil ﬁrst shut-off the mains power to the system and then remove the 4 screws on the terminal block, which

also acts as oil cap.

The oil level, when the stem is totally inside (open leaf) must reach the cavity showed in ﬁg.10

Only use D.OIL.