CAB 6114 Series Manual de instruções de montagem - Página 16
Procurar online ou descarregar pdf Manual de instruções de montagem para Acessórios para impressoras CAB 6114 Series. CAB 6114 Series 19 páginas. Air-jet box
Imprimir página
6
Operation
16
In order to get the perfect label application it is necessary to set the jets of the applicator to the size and shape of the
used label.
Ideally the settings will have been set by the manufacturer with predetermined labeling material.
Should this not be possible the following steps will assist with the initiation and/or adjustments.
6.2
Sizing the Former Plate
Take a former plate from the accessories kit.
7 8 8
Fig. 13
Former plate
Fig. 14
Cutting the aperture
Fig. 15
Slide in the former plate
dimensions in mm
...
8
Etikett
1. Place the label on the former plate. Use the front
and a side edge as orientation.
2. Mark the label size on the on thefomer plate.
3. Cut the next inside perforation..
The aperture must be smaller the the label.
4. Slide the former plate complete into the blow
module. The aperture must be on the base plate
side.
16