Cisco Unified Communications Manager 8.5(1) Manual de início rápido - Página 3
Procurar online ou descarregar pdf Manual de início rápido para Router de rede Cisco Unified Communications Manager 8.5(1). Cisco Unified Communications Manager 8.5(1) 20 páginas. 850 series and 870 series access routers cabling and setup
Também para Cisco Unified Communications Manager 8.5(1): Ficha de dados (8 páginas)
Imprimir página
- 1. Table of Contents
- 2. Cisco One-Year Limited Hardware Warranty Terms
- 3. Locate the Product Serial Number
- 4. Before Installation
- 5. Connect the Antenna to the Wireless Router (Optional)
- 6. Connect the Power-Over-Ethernet Module to the Cisco 870 Series Router (Optional)
- 7. Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers
- 7. Console Port
- 7. Power Adapter
- 8. Connect the Router
- 9. Install SDM and Configure the Router
- 10. Related Documentation
- 11. Obtaining Documentation and Submitting a Service Request
Chapter 1
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Locate the Product Serial Number
Before Installation
Check Items Shipped with the Router
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
The serial number label for the router is located on the rear of the chassis, above
the Ethernet LAN ports. (See
Figure 1-1
Product Serial Number Location
C is co 87 8
LA N
ISD N S/T
G.S HD SL
CO NS OL
FE 0
FE 1
RE SE T
FE 2
FE 3
SN: AAANNNNXXXX
Check Items Shipped with the Router
•
Nonwireless Routers
•
Read the Safety Warnings and Guidelines
•
Remove the Caution Sticker
•
Table 1-1
lists the quantity of the items that are shipped with each router model in
the Cisco 850 series and the Cisco 870 series routers.
items.
Verify that the items listed in
items is missing or damaged, contact your customer service representative.
Figure
1-1.)
E
AU X
+5 ,+9 VD
C
Table 1-1
were shipped with the router. If any of the
Locate the Product Serial Number
Figure 1-2
depicts the
1-3