Cisco WS-X45-SUP6-E - Supervisor Engine 6-E Nota de instalação e configuração
Procurar online ou descarregar pdf Nota de instalação e configuração para Router de rede Cisco WS-X45-SUP6-E - Supervisor Engine 6-E. Cisco WS-X45-SUP6-E - Supervisor Engine 6-E 30 páginas.
Imprimir página
Installation and Configuration Note for the
Catalyst 4500 E-Series Supervisor Engine 6-E
Revised: September 16, 2009
Product Numbers: WS-X45-Sup6-E
This publication describes how to install and verify the operation of the Catalyst 4500 E-series
Supervisor Engine 6-E. Refer to the software configuration guide for your switch for configuration
information for the supervisor engines and switching modules.
Catalyst 4500 E-series switching modules require the Catalyst 4500 Series Supervisor Engine 6-E,
Note
which requires Cisco IOS Release 12.2(40)SG or later.
Contents
This document contains these sections:
•
•
•
•
•
•
•
•
•
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2007 Cisco Systems, Inc. All rights reserved.
Safety Overview, page 2
Supervisor Engine 6-E, page 7
Port Cabling Specifications, page 11
Installing the Supervisor Engine, page 14
Attaching Module Interface Cables, page 17
Configuring Your Supervisor Engine, page 19
Related Documentation, page 29