Ace Acetrap15NC Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Equipamento industrial Ace Acetrap15NC. Ace Acetrap15NC 2 páginas.
Imprimir página
Caution
Do not use two tanks with
different pressures for one
trap. Because the two tanks
have a differential pressure,
condensate moves from the
high pressure tank to the
low pressure tank, and the
trap does not function
properly.
Option
If it is installed in an outdoor service
tank or in the shade of a building,
the condensate may freeze in winter,
causing damage to the ball float inside
and, in severe cases, damage to the
①Heater
housing. At this time, use a dedicated
heater to prevent the condensate from freezing. Also, if
freezing is expected on the inlet pipe coming into the trap,
it should be kept warm by wrapping it with an insulating
material or a heating wire. Use the lower of the two side
inlets of the housing for the heater.
Power specifications are 220 Volts or 110 Volts.
Since the heater is hot during operation,
Caution
there is a risk of burns if touched with bare
hands. Be sure to touch it after wearing gloves, etc.
If foreign matter larger than the
nozzle diameter
of the ace trap occurs,
3
connect a dedicated strainer to the front
of the trap. To clean the strainer, close
the inlet and balance air and fully open
②Dedicated strainer
the ball valve connected to the strainer.
In this state, slightly open the balance air to clean it
thoroughly. It can be cleaned easily without disassembly
and assembly, and since the discharged air has pressure,
connect it to the exhaust pipe of the trap, taking care not
to splash foreign objects on people and the floor of the site.
(Note: Ball valve nozzle diameter
;
3
Acetrap 15 is 5Ø, Acetrap 20 is 7Ø)
Using an installation bracket can
provide a more stable installation.
To install the bracket, unscrew the two
wrench bolts under the housing plate
and connect the bracket first, and then
③ Mounting bracket
fix it by anchor bolts into the floor.
The air vent is a function that simply
blows the air out of the container to the
atmosphere. At this time, the pressure in
the inner vessel is lowered, and it serves
to attract condensate into the vessel.
There are several shapes, and types are
④ Air vent
1/4" and 1/2".
Standard thread is PF, NPT thread
and other specifications of screws are
available upon request.
⑤ NPT thread
Maintenance
The product is always under pressure.
Warning
Be sure to work after removing the pressure.
Problem
Causes
Check that the balance line is properly
No condensate inflow.
installed.
Damage to parts due to
No
Replace all damaged parts.
freezing.
discharge
Air chamber damage.
Replace the air chamber set.
Blockage of inlet or outlet
Inlet piping cleaning and replacement.
lines.
Pilot line foreign object
Pilot line separate piping
Keep
interference.
leaking
Consumables are worn out.
Replacement of related consumables.
(Pilot line separate piping installation
https://acetrap.com/eng/acetrap/feature.html
Parts list
⑬
19
①
⑪
No.
DESCRIPTION
Housing
①
②
Housing Plate
Upper Discharge¹
③
④
Lower Discharge¹
⑤
M
Ball-Float
⑥
MR
Air Chamber
⑦
R
Diaphragm
Test key
⑧
MR
Needle Valve
⑨
R
Mesh Filter
⑩
M
⑪
Air Chamber Braket
Pilot Air Bolt
⑫
Housing Plug
⑬
Diaphragm Spring
⑭
R
⑤
⑨
Housing O-ring
⑮
R
R
Dicharge Body O-ring
16
R
Upper Discharge O-ring
17
Housing Bolt
18
MR
Housing Plug Gasket
19
Plastic outlet sets are standard, aluminum metal is optional.
Replacement parts available for supply:
(M) maintenance parts, (R) Repair parts
Technical Specification
Spec.
Model
Acetrap15N
Acetrap15NC
Acetrap15NS
Acetrap20N
Acetrap20NC
* For oil-free applications, add a "C" to the end of the model name, such as
Acetrap15NC.
* Do not use with toxic, flammable and hazardous fluids.
* Option : Internal viewing glasses (Add "S" to the end of the model name,
such as Acetrap15NS)
Trap housing pressure design conditions (not operating conditions) ;
Warning
in accordance with local regulations. May be limited under
quoted conditions.
•
Solutions
Acetrap15N
IN₂
IN₃
.
4
•
Acetrap15NS
Tip :
4
IN₂
IN₃
⑩
⑮
⑫
18
②
⑧
③
Model
⑭
Acetrap15L
17
Acetrap15N
Acetrap15H
Acetrap15NS
The above specifications are subject to change without notice. 2021.06
We are responsible for product defects within 16 months of delivery or less than 12 months
⑥
16
⑦
④
from the date of installation. In case of occurrence, the period that occurred earlier is applied
Copyright © ACE
to the two periods to prevent defective parts or incorrect production.
We guarantee free replacement of parts for any functional defects that occur. However,
at the customer's negligence Defects caused by this are excluded from the warranty.
Manufacturer and after-sales center : Ace Co., Ltd.
Size
Volume
Application
Pressure
Temp.
(ℓ/hr)
(㎥/hr)
(bar)
(℃)
Inlet
Outlet
Normal/Peak
(Compressor)
1~4
L
0~60
3 / 15
50
1/2"
3/8"
4~10
N
10~16
H
1~4
L
3/4"
1/2"
4~10
N
0~60
6 / 30
130
H
10~16
Maximum allowable pressure (bar) : 20
Maximum allowable temperature (°C) : 120
Do not use this product beyond the
specifications. Use of this product is prohibited
Dimensions
IN₁
pilot air
L
W
L₁
OUT
pilot air
IN₁
L
W
L₁
OUT
L
L
H
H
H
H
W
IN
OUT
Pilot Air
1
1
2
3
82
177 60
106 19
78
14
1/2"
3/8"
M5
95
Warranty
16-17, Chilsan-ro 387beon-gil, Gimhae-City, Korea
Tel : (82) 55 321 3369
Weight
(kg)
1.1
1.2
2.3
Weight
(kg)
1.1
1.2