Cisco XR 12416 Manual de instalação - Página 26
Procurar online ou descarregar pdf Manual de instalação para Router de rede Cisco XR 12416. Cisco XR 12416 41 páginas. Cisco systems router owner's manual
Também para Cisco XR 12416: Manual de reembalagem (26 páginas)
Imprimir páginaRoute Processor
PRP Auxiliary and Console Ports
PRP-3 LEDs
Note
Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide
1-26
The auxiliary and console ports on the PRP are EIA/TIA-232 (also known as
RS-232) asynchronous serial ports. These ports connect external devices to
monitor and manage the system.
The auxiliary port—A (male) plug that provides a data terminal equipment
•
(DTE) interface. The auxiliary port supports flow control and is often used to
connect a modem, a channel service unit (CSU), or other optional equipment
for Telnet management.
The console port—A (female) receptacle that provides a data
•
circuit-terminating equipment (DCE) interface for connecting a console
terminal.
The PRP-3 has the following LED indicators:
Two Ethernet port LEDs used in conjunction with each of the three RJ-45
•
Ethernet connectors:
LINK—Indicates link activity
–
DATA—Indicates data transmission or reception
–
Two BITS port LEDs used in conjunction with each of the two BITS ports:
•
–
SIG—Indicates carrier signal available
ACT—Indicates that the interface is active
–
BITS feature is not supported in Release 3.8.0.
One auxiliary port (AUX) and one console port (CONSOLE) LED:
•
AUX—Used as a backup for the command outputs on the Console.
–
CONSOLE—Used for configuring the router by connecting an RJ-45
–
cable to the console terminal. The router can be configured through the
console terminal.
Chapter 1
Product Overview
OL-17440-01