Cisco 1700 series Configuração - Página 4

Procurar online ou descarregar pdf Configuração para Ponto de acesso sem fios Cisco 1700 series. Cisco 1700 series 34 páginas. Secure firewall management center
Também para Cisco 1700 series: Manual de informações sobre conformidade regulamentar e segurança (45 páginas), Manual (15 páginas), Manual de configuração (25 páginas), Nota de aplicação (41 páginas), Resolução de problemas de hardware (12 páginas), Manual de síntese (13 páginas), Manual (5 páginas), Manual de início rápido (6 páginas), Manual de instalação do hardware (46 páginas)

Safety Warnings

Safety warnings appear throughout this publication in procedures that can harm you if they are

performed incorrectly. A warning symbol precedes each warning statement.

Warning Conventions

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you

Warning

work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar

with standard practices for preventing accidents. To see translations of the warnings that appear in

this publication, refer to the Regulatory Compliance and Safety Information document that

accompanied this device.

Power Supply Warnings

The following warnings apply when you are installing a card or working with the power supply:

Read the installation instructions before you connect the system to its power source.

Warning

Only trained and qualified personnel should be allowed to install or replace this equipment.

Warning

Ultimate disposal of this product should be handled according to all national laws and regulations.

Warning

When installing or replacing the unit, the ground connection must always be made first and

disconnected last.

Warning

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the

absence of a suitable installed ground conductor. Contact the appropriate electrical inspection

authority or an electrician if you are uncertain that suitable grounding is available.

Use copper conductors only.

Warning

Blank faceplates and cover panels serve three important functions: they prevent exposure to

Warning

hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)

that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not

operate the system unless all cards, faceplates, front covers, and rear covers are in place.

Configuring an ADSL WAN Interface Card on Cisco 1700 Series Routers

OL-3317-03