Epson V11H248020 - MovieMate 30s WVGA LCD Projector Manual rápido - Página 14
Procurar online ou descarregar pdf Manual rápido para Projetor Epson V11H248020 - MovieMate 30s WVGA LCD Projector. Epson V11H248020 - MovieMate 30s WVGA LCD Projector 32 páginas. Product support bulletin(s)
Também para Epson V11H248020 - MovieMate 30s WVGA LCD Projector: Manual de configuração rápida (6 páginas), Configuração (9 páginas), Boletim de apoio ao produto (4 páginas)
Imprimir página
Powering the Receiver
Connect the larger power adapter to the receiver's power port, then plug the other
end into an electrical outlet.
When you're done connecting the power adapter, see "Connecting the Receiver's
Audio Cable" below.
Connecting the Receiver's Audio Cable
Follow the steps below to connect the receiver to an audio system. If you don't
have access to an audio system, and want to connect the receiver to a pair of
unpowered speakers, see page 16 for details.
Connecting to an Audio System
Before you begin, make sure that the receiver and your audio system are turned off
and the audio system's volume is turned all the way down.
1. Depending on the type of audio system you have, you will need to connect
the receiver to it using only one of the following cables:
■
The included RCA cable (stereo)
■
The included optical audio cable (surround)
■
An optional coaxial audio cable (surround)
Caution:
Make sure that the receiver and your audio system are turned off and the audio
system's volume is turned all the way down before you connect the audio cable or
you may damage your speakers.
14
Setting Up