Cisco 500 Series Resolução de problemas e manutenção - Página 10

Procurar online ou descarregar pdf Resolução de problemas e manutenção para Ponto de acesso sem fios Cisco 500 Series. Cisco 500 Series 15 páginas. Stackable managed switches
Também para Cisco 500 Series: Manual de informações de segurança (42 páginas), Manual (4 páginas), Guia de início rápido (13 páginas), Manual de início rápido (21 páginas), Ficha de dados (5 páginas), Manual do utilizador (4 páginas), Manual do utilizador (6 páginas), Manual do utilizador (46 páginas), Manual (40 páginas), Manual de Administração (48 páginas), Manual (24 páginas), Manual de referência rápida (7 páginas), Manual de início rápido (25 páginas)

Maintain Your Cisco Headset 500 Series

Procedure

Step 1

Tap the device name in the upper left corner of your device and select the Settings application.

Step 2

Select Issues and diagnostics.

Step 3

Press Send logs.

Maintain Your Cisco Headset 500 Series

Many headset-related issues may stem from using out-of-date firmware. You can check and update your

headset firmware on any supported Cisco IP Phone or with the latest version of Cisco Jabber.

Update Your Cisco Headset Firmware With a Cisco IP Phone

You can update your headset software on any supported Cisco IP Phone. During a headset firmware upgrade,

you can view the progress on your phone screen.

During the update, the LEDs on the Cisco Headset 560 Series base blink in sequence from left to right. After

the software upgrade completes successfully, the LEDs return to their idle state.

Procedure

Step 1

Connect your headset to a Cisco IP Phone.

Step 2

If the headset does not automatically begin to update, restart the phone. The phone downloads the latest

headset version file when the phone restarts and uploads it to the headset.

You can update your headset software on any computer running Cisco Jabber version 12.5 or later. Jabber

automatically begins the update process if a new firmware release is available.

Jabber version 12.9 or later displays the headset update progress.

During the upgrade, the LEDs on the Cisco Headset 560 Series base blink in sequence from left to right. After

the software upgrade completes successfully, the LEDs return to their idle state.

Procedure

Step 1

Connect your headset via the USB cable to a computer running Cisco Jabber.

Step 2

Follow the on-screen instructions.

Troubleshooting and Maintenance