DigitaLinx DL-UHDRC70-BSTK Manual de instalação rápida - Página 3
Procurar online ou descarregar pdf Manual de instalação rápida para Extensor DigitaLinx DL-UHDRC70-BSTK. DigitaLinx DL-UHDRC70-BSTK 6 páginas.
The DigitaLinx DL-UHDRC70 is an HDBaseT extender that can extend uncompressed
4K video at a maximum of 3840x2160@60Hz/4:2:0, multichannel audio, bi-
directional POC power, RS232 and bi-directional IR up to 40 meters (~130') using a
single Category 6 twisted pair cable. At 1080p@60Hz/4:4:4 the unit can extend up
Some select standard cable boxes that have sub versions of HDMI 1.2/1.3 chipsets
that do not support clock stretching which is an integral part of the HDCP handshake.
This can cause transmission issues when using traditional HDBaseT extenders.
The DL-UHDRC70 features an embedded circuit that addresses and solves HDMI
clock stretching issues that are common in older cable set top boxes with older
The DL-UHDRC70 is sold only as a set. The individual transmitter and receiver are not
compatible with other HDBaseT devices due to proprietary PoE circuitry.
1.
DC18V - Locking DC 18V power connector
2.
HDBaseT In/Out - Connects transmitter and receiver together; supports PoC / bi-directional
power
3.
IR IN/OUT (TRANSMITTER) - Connects IR receiver / emitter to control devices via IR
4.
IR IN/OUT (RECEIVER) - Connects IR receiver / emitter to control devices via IR
5.
RS232 - Serial control pass through port; passes RS232 commands from TX to RX
6.
HDMI IN - Video input; connects to output of video source devices
7.
HDMI OUT- Video output; connects to input of display peripheral
to 70 meters (~230').
HDMI chipsets.
Front / Rear Panel
DL-UHDRC70 Quick Guide