DigitaLinx IPEX2002 Manual de instalação rápida - Página 4

Procurar online ou descarregar pdf Manual de instalação rápida para Extensor DigitaLinx IPEX2002. DigitaLinx IPEX2002 17 páginas. Ipex2000 series

IPEX2000 Series Quick Install Guide

26. When the apparatus is not in use or during its relocation, take care of the power cord and plugs; e.g. tie up the power

cord with cable tie or similar. The tie must be free from sharp edges and the like that might cause abrasion of the power

cord. When put into use again ensure the power cord and plugs are not damaged. If any damage is found the power cord

and plugs should be replaced by items either specified by the manufacturer or that have same characteristics as the original

items.

27.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the

presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to

constitute a risk of electric shock.

28. WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts

inside. Refer servicing to qualified personnel.

29.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance instructions in the literature accompanying the appliance.

30.

Protective earthing terminal. The apparatus should be connected to a mains socket outlet with a protective

earthing connection.

31. CAUTION: To prevent electric shock hazard, replace grille. (CSA 60065, clause 5.3A)

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR