Cisco aironet 1810 series Manual do utilizador - Página 15

Procurar online ou descarregar pdf Manual do utilizador para Ponto de acesso sem fios Cisco aironet 1810 series. Cisco aironet 1810 series 30 páginas. Officeextend access point

Imprimir página
Understanding the Access Point GUI
This chapter provides the following information:
•
•
•
•
•

Accessing the GUI

Follow these steps to access the Cisco Aironet 1810 Series OfficeExtend access point GUI.
Step 1
Connect your laptop to the local Ethernet port 1, or 2 on the 1810 Series OfficeExtend access point.
Note
With the 1810 Series OfficeExtend access point connected to your home router/gateway as described in
Step 2
the procedure
the 1810 Series OfficeExtend access point in the Address field of your Internet browser
(http://<ap-ipaddress>) and click Go.
Note
Note
The 1810 Series Office Extend Access Point Login page is displayed.
When prompted, enter the username and password to log into the access point.
Step 3
Note
Accessing the GUI, page 2-1
Home Page, page 2-3
Configuration Page, page 2-5
Event Log Page, page 2-14
Network Diagnostics, page 2-15
Ethernet port 4 (Remote LAN port) may not be used to configure the 1810 Series OfficeExtend
access point.
"Installing the Access Point in the Network" section on page
The default IP address is 10.0.0.1.
Make sure your laptop is not connected to your company's network using a virtual private
network (VPN) connection.
The default username and password are admin and admin.
C H A P T E R
Cisco Aironet 1810 Series OfficeExtend Access Point User Guide
2
1-2, enter the IP address of
2-1