Cisco Aironet 1815i Manual de iniciação - Página 11

Procurar online ou descarregar pdf Manual de iniciação para Ponto de acesso sem fios Cisco Aironet 1815i. Cisco Aironet 1815i 44 páginas.

This product and all interconnected equipment must be installed indoors within the same

Caution

building, including the associated LAN connections as defined by Environment A of the

IEEE 802.3af/at Standard.

When this access point is installed in the air handling system, the face of the AP (having the

Note

status LED) should not be oriented upwards. The access point is suitable for use in

environmental air space in accordance with section 300.22.C of the National Electrical Code

and sections 2-128, 12-010(3), and 12-100 of the Canadian Electrical Code, Part 1, C22.1.

You should not install the power supply or power injector in air handling spaces.

Note

When this access point is installed in the air handling system, the face of the AP (having the

status LED) should not be oriented upwards. Use only with listed Information Technology

Equipment (ITE) equipment. For more information on ITE equipment, refer to article 645 of

the latest National Electrical Code (NEC).

Unpacking the AP

To unpack the access point, follow these steps:

Unpack and remove the access point and the mounting accessories, from the shipping box.

Step 1

Step 2

Return any packing material to the shipping container and save it for future use.

Verify that you have received the items listed below. If any item is missing or damaged, contact

Step 3

your Cisco representative or reseller for instructions.

The access point.

–

Mounting bracket AIR-AP-BRACKET-8, only if selected when you ordered the access point.

–

Can be ordered separately also.

T-RAIL clips and Channel Adapter (only if selected when you ordered the access point).

–