DigitaLinx DL-HD70LS Manual do Proprietário - Página 9
Procurar online ou descarregar pdf Manual do Proprietário para Transmissor DigitaLinx DL-HD70LS. DigitaLinx DL-HD70LS 15 páginas.
Também para DigitaLinx DL-HD70LS: Manual de instalação rápida (8 páginas)
Imprimir página
HDBaseT Connection
Connect one end of a Category cable to the DL-HD70LS transmitter labeled TWISTED PAIR, then connect the
other end of the Category cable to the DL-HD70LS receiver labeled TWISTED PAIR
To ensure proper performance of the DL-HD70, it is recommended that you use solid core, shielded Category 6 F/UTP
cabling at a minimum. Category 5e F/UTP may perform well up to a certain length but may not support power over
HDBaseT reliably longer distances.
For optimized performance use the following Liberty Wire and Cable branded cabling;
Category 6 plenum; 24-4P-P-L6SH
Category 6A plenum; 24-4P-P-L6ASH
Category 6 NON-plenum; 24-4P-L6SH
Category 6A NON -plenum; 24-4P-L6ASH
1
8
TIA/EIA-568B
P n 1
Or n e/Wh te
P n 2
Or n e
P n 3
Green/Wh te
P n 4
Blue
P n 5
Blue/Wh te
P n 6
Green
P n 7
Brown/Wh te
P n 8
Brown
When using shielded category cabling ALWAYS...
....use shielded connectors
....properly ground the category cable
Twisted Pair Wiring
Use TIA/EIA-568B wiring for Category 6
connection between send and receive
units.
DL-HD70LS Owners Manual
9