DigitaLinx DL-HDE100 Manual do Proprietário - Página 8
Procurar online ou descarregar pdf Manual do Proprietário para Transmissor DigitaLinx DL-HDE100. DigitaLinx DL-HDE100 16 páginas. Extender set transmits hdmi, bidirectional ir, rs232 and
ethernet up to 100 meters away using a single category 6 twisted pair cable.
Também para DigitaLinx DL-HDE100: Manual de instalação (4 páginas), Manual de instalação rápida (8 páginas)
Imprimir página
DL-HD70 Owners Manual
Quick Start
1.
Connect video source to transmitter HDMI IN
2.
Connect display technology to receiver HDMI OUT
3.
Connect transmitter and receiver together with a shielded Category 6 cable
4.
Connect control (optional)
5.
Connect Ethernet (optional)
6.
Apply power to either transmitter OR receiver to power entire circuit
Connecting a Video Source
HDMI Input (Transmitter)
Connect an HDMI source device to the HDMI input on the DL-HDE100 transmitter labeled HDMI IN using an
HDMI cable that is less than or equal to 5 meters in total length. For HDMI source devices that are further away,
an active HDMI cable may be required to complete the connection.
Connecting a Display
HDMI Output (Receiver)
Connect the display to the HDMI output on the DL-HDE100 receiver labeled HDMI OUT using an HDMI cable
that is less than or equal to 5 meters in length. It is recommended to keep the DL-HDE100 receiver near the
display input as it is not recommended that an active HDMI cable be used on the HDMI output on the DL-
HDE100 receiver.
8