Cabela's 08-0601-C Manual - Página 12

Procurar online ou descarregar pdf Manual para Poupança de alimentos Cabela's 08-0601-C. Cabela's 08-0601-C 13 páginas. Pro series vacuum sealer

Imprimir página

WARNING!

Before cleaning, assembling or disassembling the

Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS

REMOVED FROM THE OUTLET/POWER SOURCE!

AUTOMATIC MODE OPERATION

BEFORE ATTEMPTING VACUUM PACKAGING BE SURE THAT THE VACUUM

SEALER IS SET UP IN ACCORDANCE WITH ALL OF THE SAFETY PRECAUTIONS

LISTED IN THIS BOOKLET.

With the Vacuum Sealer plugged in and

the power turned on, check to be sure the

Auto Mode Light is illuminated; press the

Mode Button until the Auto Light is on.

Place the items to be vacuum sealed into

a vacuum bag. Allow at least 2" (5 cm) at the

open end of the bag in order to create enough

seal space. Be sure not to cover the Vacuum

Port (Figure C).

Close the Vacuum Lid and check

that the bag opening is in the center of the

Vacuum Chamber.

Press and release the Start Button. The

2-Piston Vacuum Pump will begin removing

air from the bag while the LED Vacuum

Window begins to count up.

need to apply light pressure to the Vacuum

Lid during the count-up process. The LED

Vacuum Window will count up starting at

the number "1" and going thru to the number

"9", before automatically engaging the bag

sealing process. These numbers represent

stages, not seconds.

Once the LED Vacuum Window displays the number "9", the sealing process

will begin by counting down from your chosen setting to "0" on the LED Seal Window.

Once the LED Seal Window has reached "0", the Vacuum Sealer will

automatically stop the 2-Piston Vacuum Pump and release the vacuum pressure

moments later. DO NOT ATTEMPT TO PULL THE VACUUM LID OPEN BEFORE

THE VACUUM HAS BEEN RELEASED, SEVERE DAMAGE TO THE SEALING

BAR WILL RESULT.

NOTE: The Vacuum Sealer is ONLY intended to be used with VACUUM BAGS. For

best results, only use the recommended vacuum bags. DO NOT USE HOUSEHOLD

BAGS! Any other uses of the Vacuum Sealer, other than the uses described in this

booklet, could potentially damage the appliance and void the warranty!

Vacuum Port

You may

-12-

WARNING!

Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS

REMOVED FROM THE OUTLET/POWER SOURCE!

BEFORE ATTEMPTING VACUUM PACKAGING, BE SURE THAT THE

VACUUM SEALER IS SET UP IN ACCORDANCE WITH ALL OF THE SAFETY

PRECAUTIONS LISTED IN THIS BOOKLET.

Figure C

With the Vacuum Sealer plugged in

and the power turned on, check to be sure

the Manual Mode Light is illuminated; if not

press the Mode Button until the manual light

is on.

Place the items to be vacuum sealed into

a vacuum bag. Allow at least 2" (5 cm) at the

open end of the bag in order to create enough

seal space. Be sure not to cover the Vacuum

Ports (Figure D).

Close the Vacuum Lid and check

that the bag opening is in the center of the

Leave 2"

Vacuum Chamber.

Seal

Space

While monitoring the vacuum bag, press

and release START Button. The 2-Piston

Vacuum Pump will begin removing air from

the bag. When the desired level of air has

been evacuated from the bag, press and

release the Manual Bag Seal Button. It

will start the sealing bag process.

Note: You may need to apply light pressure

to the Vacuum Lid during this process.

Note: It requires some vacuum pressure in the bag to get good seal for the bag.

Once the LED Seal Window has reached "0", the Vacuum Sealer will

automatically stop the Vacuum Pump and release the vacuum pressure moments

later. DO NOT ATTEMPT TO PULL THE VACUUM LID OPEN BEFORE THE

VACUUM HAS BEEN RELEASED, SEVERE DAMAGE TO THE SEALING BAR

WILL RESULT.