ACU-RITE 01141 Manual de instruções - Página 16

Procurar online ou descarregar pdf Manual de instruções para Estação meteorológica ACU-RITE 01141. ACU-RITE 01141 20 páginas. Professional weather center

Imprimir página

Care & Maintenance

Display Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep

away from dust, dirt and moisture. Clean ventilation ports regularly with a

gentle puff of air.

5-in-1 Sensor Care

Clean the Sensor

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives that will

mar the polished surfaces of the rain collection funnel or the solar cell. Scratches

will result in decreased performance and reliability.

Insect Prevention

Insects may cause obstructions and interrupt data by nesting in or on the 5-in-1

sensor. To limit this problem, spray the OUTSIDE of the sensor with a household

insect repellent. Consult the insect repellent instructions prior to use.

Snow & Freezing Weather

The 5-in-1 sensor will not be damaged by freezing conditions. NOTE: If the rain

collector cup fills with snow and then melts, it will register as rain on the display.

Clean the Rain Collector Cup

Remove and empty rain collector debris filter. The debris filter is located in the

rain collector funnel. Remove from the top by gently squeezing and pulling out.

Clean the Wind Vane & Anemometer

Remove foreign matter from the outside of the sensor for free movement of the

wind vane and anemometer. If needed, use a small amount of spray lubricant,

clear silicone or graphite powder on the anemometer for improved movement.

Calibration

The indoor / outdoor temperature and humidity readings, and barometric

pressure can be calibrated on the display to improve accuracy. Calibration can

improve accuracy when sensor placement or environmental factors impact the

data accuracy.

1. To access calibration mode, press AND HOLD the "

buttons simultaneously for at least 5 seconds.

2. To adjust the currently selected (flashing) item, press and release the "

or "

" buttons to calibrate the data value higher or lower from the actual

reading.

3. To save your adjustments, press and release the "

next preference. The "

values.

" icon will remain illuminated next to calibrated

", "

" and "

" button to adjust the