Cisco ASA 5508-X Montar e ligar - Página 5

Procurar online ou descarregar pdf Montar e ligar para Ponto de acesso sem fios Cisco ASA 5508-X. Cisco ASA 5508-X 6 páginas. Threat defense reimage guide
Também para Cisco ASA 5508-X: Manual de instalação do hardware (32 páginas), Manual de início rápido (8 páginas), Manual de configuração fácil (11 páginas), Manual de início rápido (9 páginas), Manual do software (37 páginas), Manual (14 páginas)

Mount and Connect

Figure 3: ASA 5508-X and ASA 5516-X Console Port Connection

Mini USB Type B console port

USB Type A

Step 4

Connect the end of the cable with the DB-9 connector (or USB Type A) to the terminal or PC. If your terminal or PC has

a console port that does not accommodate a DB-9 connector, you must provide an appropriate adapter for that port.

The LED for the console port turns green and within a few moments the Found New Hardware Wizard appears.

Step 5

Follow the instructions to complete the driver installation.

Step 6

To communicate with the ASA, start a terminal emulator application. This software should be configured with the

following parameters:

• 9600 baud

• 8 data bits

• no parity

• 1 stop bit

• no flow control

Connect to the Console Port with Mac OS X

Follow these steps to connect a Mac OS X system USB port to the console using the built-in OS X Terminal

utility, or alternatively you can use a separate terminal emulator application.

Connect to the Console Port with Mac OS X

Mini USB Type B to USB Type

A console cable

Mount and Connect