Cisco Catalyst 9117AXI Manual de iniciação - Página 13

Procurar online ou descarregar pdf Manual de iniciação para Ponto de acesso sem fios Cisco Catalyst 9117AXI. Cisco Catalyst 9117AXI 36 páginas.

Cisco Catalyst 9117AX Series Access Points

Mounting the Access Point

Cisco Catalyst 9117AX series access points can be mounted in several configurations – on a suspended ceiling, on a

hard ceiling or wall, on an electrical or network box, and above a suspended ceiling.

For access point mounting instructions, go to the following URL:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mounting/guide/apmount.html

The standard mounting hardware supported by the AP is listed in

Table 1

Brackets and Clips for Mounting the AP

Part Number

Brackets

AIR-AP-BRACKET-1

AIR-AP-BRACKET-2

Clips

AIR-AP-T-RAIL-R

AIR-AP-T-RAIL-F

AIR-CHNL-ADAPTER

1. Mount the AP using no less than four screw holes on a bracket.

When mounting the AP in areas where there is a possibility of the AP being knocked off the mounting bracket, use the

lock hasp on the back of the AP (see

Figure 4

Locking the AP to the Bracket

Position of the hasps for the locks on the back of the 9117AXI models

Description

Low-profile bracket

(This is the default option)

Universal bracket

Ceiling Grid Clip (Recessed mounting)

(This is the default option)

Ceiling Grid Clip (Flush mounting)

Optional adapter for channel-rail ceiling grid profile.

Figure

4) to lock it to the bracket.

Table