Cisco Catalyst 9120AX Series Manual de iniciação - Página 12
Procurar online ou descarregar pdf Manual de iniciação para Ponto de acesso sem fios Cisco Catalyst 9120AX Series. Cisco Catalyst 9120AX Series 33 páginas.
Imprimir página
Cisco Catalyst 9120AX Series Access Points
9
Mounting the Access Point
Cisco Catalyst 9120AX series access points can be mounted in several configurations – on a suspended ceiling, on a
hard ceiling or wall, on an electrical or network box, and above a suspended ceiling.
For access point mounting instructions, go to the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mounting/guide/apmount.html
The standard mounting hardware supported by the AP is listed in
Table 1
Brackets and Clips for Mounting the AP
123
Brackets
Clips
1. Mount the AP using no less than four screw holes on a bracket.
2. AIR-AP-BRACKET-3 is not compatible for use with Cisco Catalyst 9120AX series access points.
3. You can also use "in-tile" mounting options available from third parties. For more information, visit the
access point data sheet available on Cisco.com at
https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9100ax-access-points/guide-c07-
742311.html.
When mounting the AP in areas where there is a possibility of the AP being knocked off the mounting bracket, use the
lock hasp on the back of the AP (see
Figure 4
Locking the AP to the Bracket
1
Position of the hasps for the locks on the back of the 9120AXI model
Part Number
Description
AIR-AP-BRACKET-1
Low-profile bracket
(This is the default option)
AIR-AP-BRACKET-2
Universal bracket
AIR-AP-T-RAIL-R
Ceiling Grid Clip (Recessed mounting)
(This is the default option)
AIR-AP-T-RAIL-F
Ceiling Grid Clip (Flush mounting)
AIR-CHNL-ADAPTER
Optional adapter for channel-rail ceiling grid profile.
Figure
4) to lock it to the bracket.
Table
1.
12