Cisco Linksys WET610N Manual de instalação rápida - Página 6

Procurar online ou descarregar pdf Manual de instalação rápida para Ponto de acesso sem fios Cisco Linksys WET610N. Cisco Linksys WET610N 12 páginas. 802.11ac
Também para Cisco Linksys WET610N: Manual de instalação rápida (49 páginas), Manual de instalação rápida (20 páginas), Manual do utilizador (17 páginas), Configuração (3 páginas)

Imprimir página
Cisco Linksys WET610N Manual de instalação rápida
Installation
M.
The available networks are
listed in the table. Select your
network, and then click Next.
(If your router supports Wi-Fi
Protected Setup, which is
indicated by the
to the network name, then
proceed to the section, "Wi-Fi
Protected Setup".)
If your network is not listed, select My network is not in this list, and
click Next. Proceed to step O.
N.
If your network does not use
wireless security, proceed to
step P.
If your network uses wireless
security, enter the security key
of your wireless network. Click
Next. Then proceed to step P.
O.
Configure the following:
Wireless Network Name
(SSID)
Enter the name of your
wireless network.
Authentication Type
the authentication used by your
wireless network.
Encryption Type
the encryption used by your
wireless network.
Security Key
Click Next.
NOTE:
may want to configure wireless security on your router if you
have not already done so.
6
icon next
Select
Select
Enter the security key of your wireless network.
If you are connecting to your own wireless network, you
Wireless-N Ethernet Bridge with Dual-Band
WET610N