Cisco Meraki CW9162I-MR Manual de instalação do hardware - Página 13

Procurar online ou descarregar pdf Manual de instalação do hardware para Ponto de acesso sem fios Cisco Meraki CW9162I-MR. Cisco Meraki CW9162I-MR 23 páginas.

Imprimir página

4.2.2.1 Powering the CW9162I-MR with the Meraki AC Adapter (sold separately)

1. Plug the power cord into the CW9162I-MR and the other end into a wall outlet.

2. Plug an Ethernet cable that is connected to an active Ethernet connection into the Eth0 port on

the CW9162I-MR.

4.2.2.2 Powering the CW9162I-MR with the Meraki 802.3at Power over Ethernet Injector (sold

separately)

1. Plug the power cord into the PoE Injector and the other end into wall power.

2. Plug an Ethernet cable that is connected to an active Ethernet connection into the "IN" port on the

injector.

3. Route Ethernet cable from the "OUT" port on the injector to the Eth0 port in the cable bay of the

CW9162I-MR.