Epson EcoTank ET-15000 Series Começar aqui - Página 2
Procurar online ou descarregar pdf Começar aqui para Impressora tudo em um Epson EcoTank ET-15000 Series. Epson EcoTank ET-15000 Series 4 páginas.
Imprimir página
5
Wait for the ink to fill the tank.
Do not squeeze the bottle.
Note:
Ink flows into the tank and
stops automatically when the ink is
filled to the upper line. If ink does
not flow from the bottle, lift and
reinsert the bottle.
Caution:
After setup, periodically
inspect the ink level to ensure it
is not below the lowest line on
the tank. Prolonged use when
ink is below the lowest line could
damage the product. See the
online User's Guide for refilling
instructions.
6
When the ink tank is full, remove the ink
bottle and securely close it with the cap.
Place the remaining ink aside; you will
need it later.
Note:
Do not leave the ink bottle inserted;
otherwise the bottle may be damaged or ink
may leak.
7
Close the ink tank cap.
8
Repeat the previous steps for the other colors.
9
Close the ink tank cover.
10
Lift the scanner unit up slightly and lower it. When
the scanner unit catches, lift it up again and lower it
completely.
11
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
12
Raise the control panel, then press the
turn on the product.
Note:
If an error message appears, turn off the product and
check that no protective material has been left inside the
product.
13
Select your language, country, date, and time.
Note:
You can change these settings later using the product's
control panel. For more information, see the online User's Guide.
Follow steps 14 and 15 to continue ink charging.
14
When the message to see the Start Here sheet appears
on the LCD screen, press and hold the
5 seconds.
15
When the ink confirmation message appears on the LCD
screen, select Done to start charging the ink. Ink charging
takes approximately 10 minutes.
Caution:
Do not unplug or turn off the product, raise the
scanner unit, or load paper while the product is charging or you'll
waste ink.
Note:
The included ink bottles are designed for reliable printer
setup and cannot be resold. After setup, the remaining ink is
available for printing.
16
To complete filling the ink tanks, repeat steps 1 through 7
using the remaining ink in the bottles.
Note:
Replace the bottle cap before disposing of the bottles.
17
Close the ink tank cover and scanner unit.
18
Select Next and follow the on-screen instructions to reset
the ink levels.
19
Follow the on-screen instructions to adjust the print
quality.
Note:
• You need to load paper before you can adjust the print quality. See
"Load paper" on the back of this sheet for details.
• You can change these settings later using the product's control
panel. For more information, see the online User's Guide.
power button to
help button for