Cisco 500 Series Manual de início rápido - Página 4

Procurar online ou descarregar pdf Manual de início rápido para Sistema de conferência Cisco 500 Series. Cisco 500 Series 21 páginas. Stackable managed switches
Também para Cisco 500 Series: Manual de informações de segurança (42 páginas), Manual (4 páginas), Guia de início rápido (13 páginas), Ficha de dados (5 páginas), Manual do utilizador (4 páginas), Manual do utilizador (6 páginas), Manual do utilizador (46 páginas), Manual (40 páginas), Manual de Administração (48 páginas), Manual (24 páginas), Resolução de problemas e manutenção (15 páginas), Manual de referência rápida (7 páginas), Manual de início rápido (25 páginas)

Connecting Network Devices

To connect the switch to the network:

Connect an Ethernet cable to an Ethernet port of a computer, printer,

TEP

network storage, or other network device.

Connect the other end of the network Ethernet cable to one of the

TEP

numbered switch Ethernet ports.

The Ethernet port light turns green when the connection is active.

Refer to

Managed Switch, page 12

and LEDs on each switch.

Repeat

TEP

the switch.

Cisco strongly recommends using Cat5 or better cable for Gigabit

OTE

connectivity. When you connect your network devices, do not exceed

the maximum cabling distance of 100 meters (328 feet). It can take up to

one minute for attached devices or the LAN to be operational after it is

connected. This is normal behavior.

500 Series switches have both standard Ethernet and stack ports.

OTE

Standard ethernet ports can not be used for stacking. Refer to

the Switches, page 8

If your switch is one of the PoE models, as a PSE (Power Sourcing

Equipment) device, the switch supports 802.3at which can deliver up to 30

Watts per PoE port to a PD (Powered Device).

External Features of the Cisco 500 Series Stackable

Step 1

and

Step 2

for additional details.

for details about the different ports

for each device you want to connect to

500 Series Stackable Managed Switches

Stacking