Cisco 7821 Manual do utilizador - Página 2

Requirements

1. Identify Cisco 7821 device

To start and successfully complete registration of your Cisco device you need to know which

device model you will setup.

From the back of each Cisco device there are exact model information that you should check.

Although different device models can have exactly the same requirements and installation

procedure, device models can also have significantly different requirements and installation

procedure, so that ignorance of your own model may result in the inability to successfully set

up your device.

2. device firmware

Make sure that your device is loaded with appropriate firmware version, 11.0.1.

For Cisco 7821 press settings button, then type 61 to check the version of the software.

3. DHCP server

Fully configured and operational DHCP server.

4. PBXware version

In order to find out the PBXware version, please login to PBXware and navigate to Settings:

About. On the top of "About" page is a code similar to this one "PBXware Edition: Business,

Release: 4.1.3 (041373f), Running: 1.4.24-gc-75ee203", where "Release" denotes the exact

version of your PBXware.

This chapter describes how to install and connect the device to the electrical power and data